A Rowing Contact Mechanics Evaluation by Jerry Decime
RESEARCH MODELS AND DATA — 13 OCTOBER 2026

STUDY PURPOSE
Compare the seat-support demands of a moving seat with fixed foot support and
oarlocks against a fixed seat with a moving, linked foot support and oarlocks.
The models examine contact feasibility during a prescribed leg drive. Power
and complete-boat performance require additional physiological and mechanical
measurements.

REFERENCE RESULTS
At an illustrative 1,200 N foot-force peak and 780 N opposing hand force:
- Floating fixed-seat traction: 157.272727 N.
- Local moving-seat traction: 14.540230 N (2 kg seat; 5 N rail resistance).
- Scalar normal load: 353.85 N; static friction capacity: 123.8475 N.
- Fixed-seat pulse: first slip at 0.2995 s; 120 mm travel criterion at 0.608 s.
- Moving seat at 0.608 s: 399.487 mm rail travel and zero pelvis-to-seat slip.
- Native constant-load contact test at 0.8 s: 125.902 mm displacement,
  compared with the analytical value of 125.836 mm.

MODEL BOUNDARIES
The fixed-seat pulse couples an 85 kg rower to a 25 kg accelerating hull.
The moving-seat model places an 85 kg rower and 2 kg seat on a constant-speed
rail. The two boundary conditions provide a local interface comparison, not
matched whole-boat trials. Both models suppress vertical and angular motion
and prescribe N = mg - 0.4F, H = 0.65F, and static/kinetic friction 0.35/0.28.
The fixed-seat reference uses a 0.8 s sinusoidal-squared force pulse, initial
hull speed 4 m/s, and drag D = 5 V|V|. The 120 mm cutoff is a chosen criterion.

Native Blender contact tests use constant effective loading and one contact
coefficient. Their prescribed accelerating frame remains fixed after slip.
They test the local friction and support laws separately from the coupled
pulse model. The illustrated rowing scene uses model-derived seat motion;
body pose and sliding-rigger motion are prescribed illustrations. Seat-relative
deflection means slip, not elastic seat, cushion, or tissue deformation.
No model parameters were fitted to measurements of an athlete or a boat.

CONTENTS
models/contact_model.py       Fixed-seat force balances and two-mass dynamics
models/comparison_model.py    Moving-seat dynamics and ten comparison checks
models/test_models.py         28 numerical tests and eight symbolic identities
models/blender_benchmarks.py  Eleven native contact cases at three frame rates
models/render_blender.py      Geometry for paired contact and tipping scenes
models/render_comparison.py   Illustrated rowing geometry and trajectory mapping
scripts/verify_saved_blender.py      Saved native contact-state verification
scripts/verify_comparison_scene.py  Illustrated seat positions versus CSV traces
results/*.csv                Pulse trajectories and parameter sweep
results/*.json               Numerical and saved-scene verification reports
results/blender/*.csv         All 33 native contact trajectories
results/blender/*.blend       Eleven contact cases and two comparison scenes
results/blender/report.json   Native results, predictions, and tolerances
MANIFEST.json                SHA-256 checksums of the research files

DATA CONVENTIONS
All mechanical data use SI units: seconds, metres, kilograms, newtons, and
joules. In fixed-seat CSVs, F is foot force, Q = F - H is the net prescribed
horizontal load, N is normal force, D is hull drag, and S is the seat restraint
applied against the rower's forward loading direction. 'required' is the
traction needed for sticking; 'capacity' is the static friction limit.
xr/xb and vr/vb are rower/hull positions and velocities. 'slip' is relative
rower-to-seat displacement. 'dissipation' is accumulated frictional loss.
In moving_seat.csv, xs/vs describe the seat relative to its constant-speed
rail; 'rail' is resistance and 'residual' is the work/energy balance residual.
Each native contact CSV reports frame, time, position, and rotation angle
in degrees (angle_deg).

The pulse uses midpoint force samples and starting-velocity hull drag.
Position and work use mean velocities. Slip onset labels the first sliding
step; the travel boundary is not interpolated. Numerical refinement and
model assumptions determine the interpretation of the reported precision.

COMPUTATIONAL REPRODUCTION
The reduced solvers use standard-library Python. The symbolic checks require
SymPy 1.14.0. Native runs used Blender 5.2.1 LTS, build 9e2066aef7ef, with ten
substeps per frame and 100 solver iterations. From this archive's directory,
the following sequence regenerates the principal model results:

  python models/contact_model.py
  python models/test_models.py
  blender --background --factory-startup --python models/blender_benchmarks.py
  python models/comparison_model.py

Native benchmarks advance frames sequentially and save baked contact scenes.
Acceptance criteria are defined in the source and stored in the JSON reports.
All 33 native runs, 28 numerical tests, eight symbolic identities, and ten
comparison checks passed for the archived results. These checks establish
computational agreement under the stated assumptions; physical validation
requires measured forces, motion, geometry, and interface properties.
