A Rowing Contact Mechanics Evaluation by Jerry Decime
BLENDER RESEARCH SCENES — 13 OCTOBER 2026

Thirteen scenes accompany the local contact and configuration comparison:
- Eleven native rigid-body cases: reference sliding, increased friction,
  zero friction, zero tangential load, separation, two friction-calibration
  pairs, and moment support inside/outside the contact base.
- comparison.blend: paired lower-grip and higher-grip native contact tests.
- rowing_configuration_illustration.blend: illustrated moving-seat and
  fixed-seat rowing configurations driven by numerical seat trajectories.

The native scenes use Blender 5.2.1 LTS and contain baked rigid-body caches.
Source scripts, the reference and moving-seat trajectories, and the native
contact report are included. The native benchmark source defines the loads,
geometry, integration settings, and acceptance criteria for all 33 runs.

INTERPRETATION
Native blocks test local friction, unilateral support, and pitching behavior.
They use one friction coefficient and constant effective load in a prescribed
accelerating frame. They are not anatomical models.

The illustrated rowing scene uses an accelerating-hull fixed-seat trajectory
and a constant-speed-rail moving-seat trajectory. Pelvis-to-seat displacement
comes from those numerical models. Body posture, oar motion, and rigger travel
are prescribed illustrations. This comparison does not establish matched
whole-boat efficiency or maximum power. Seat-relative deflection is slip;
elastic padding, seat structure, and tissue deformation are not modeled.

All numerical examples use illustrative parameters. The complete models and
research data archive contains the wider parameter sweep, pulse scenarios,
independent numerical tests, and symbolic verification.
